UV LAMINATION IS HIGHLY RECOMMENDED! IF YOU PLAN ON A CLEAR COAT YOU DO NOT NEED THE LAMINATE!
IT IS ALSO MUCH EASIER TO APPLY THIS BEFORE YOU PUT YOUR FINS ON!!! then trim your slots and fillets right over the wrap where it meets the fins!
Custom colors can be done at an additional charge Contact me for those options.
PLEASE NOTE I HAVE FOUND THAT THIS MAY HAVE COME IN MORE THAN ONE SIZE.. IT APPEARS THE NEWEST VERSION IS APPROX 44″ long (body tube only not including nose cone) THIS WRAP IS DESIGNED NOW TO FIT THAT SIZE IF YOUR TORRENTS TUBES ARE DIFFERENT THAN THAT PLEASE CONTACT ME BEFORE PLACING AN ORDER
This is a FULL COLOR printed WRAP it will cover the ENTIRE body tube only!. (you paint the fins and nose cone) I can ALSO customize this wrap or change the colors on this wrap.. the only limit is your imagination.
Please note I have rotated the “Torrent” lettering 190 deg. to make it not be upside down when the rocket is on the pad.
UV Lamination is a CLEAR layer OVER the printed decal it protects from Scratching and fading. it will Double the life of the wrap! I HIGHLY Recommend this option. if you do NOT choose Lamination A CLEAR COAT over the decals is VERY HIGHLY recommended to protect the inks and colors!
Circumferenceis the distance around the outside of a circle – or in our case, a tube. It is calculated by multiplying pi times the diameter.
Circle Circumference DiameterCircumference
In rocketry, there are so many different sized tubes out there. Just because a tube is advertised as a 2″ tube doesn’t mean it’s actually 2″. Some manufacturers’ 2″ tubes are actually 1.9″ (like Aerotech). Estes made a BT67 that was 2.02″ and a BT70 that was 2.217″. For a long time, standard 5.5″ tube was actually 5.38″, for example. For this reason, there are far too many circumference sizes to list each one, so we ask you to provide a circumference.
PLEASE ALSO REMEMBER WHAT A TUBE IS ADVERTISED TO BE IS ALMOST NEVER CORRECT! it may say its a 4″ tube but chances are its either 3.91 or 4.12″ (these are BOTH very common)
When finding your circumference, DO NOT simply “do the math” or use calipers to take your measurement then do the math. More often than not, you’ll squeeze the tube (even just a tiny bit) when measuring diameter/radius, which will give you the wrong number right from the get-go and your math will be wrong, ACTUALLY IT WILL MULTIPLY YOUR SMALL ERROR BY 3.1415 NOW making it a HUGE error. (if you squeeze your tube just 1/8″ you will be off by almost 1/2″ when doing the math!!!!) . Instead, please physically wrap something (such as a piece of paper, tape or measuring tape) around your tube, mark it, and measure it to get an exact circumference. (THIS METHOD WILL ALWAYS BE CORRECT EVEN IF YOU SMASH THE TUBE BY 2 INCHES!) Then, when you make your order, select the closest Diameter size listed and then enter your exact circumference measurement! That way, we can adjust the decal size to fit your tube exactly!
SO THE BEST WAY TO GET AN ACCURATELY FIT DECAL TO YOUR ROCKET, USE SOMETHING AND MEASURE AROUND YOUR FINISHED TUBE, THIS IS FAST AND EASY AND ALW@AYS ACCURATE!
IF your tube is a standard tube with no extra fiberglass or super thick paint etc. you can enter ” MADCOW THINWALL FIBERGLASS” or “PML PHENOLIC TUBE” etc I do have measurements for MOST standard HIGH POWER tubes. BUT entering your TRUE Circumference will ALWAYS give you the BEST matched decal for your rocket.
