DER ED MAX IRON MAIDEN

THIS IS A ONE OF A KIND SET IT IS A FULL WRAP!    IF your  rocket has Through the wall fins mounts.

I HIGHLY recommend  wrapping your tube BEFORE you install the fins..  Then install the fins. (they are slightly oversized for some wiggle room you will need to TRIM them to fit)   NO filet on the OUTSIDE.    then apply fin decals,  then a minimal “fillet” once the fins are installed  RIGHT over the decal. YOU CAN ADD FOOD COLORING to your  epoxy to color it.. (it only takes a drop or two!)

I suggest painting your fins BLACK BEFORE installing the fin decals.  AND some trimming might  be needed. these will NOT cover every inch of the fins, the areas  where you beveled the fins   is about what will not be covered!

 THESE ARE SIZED TO A STANDARD  Der red max.. AND ARE SCALED DIRECTLY UP OR DOWN FROM THE ESTES KIT..   IT SHOULD FIT MOST KITS   BUT TO GET A PERFECT FIT ON FIN DECALS ESPECIALLY  PLEASE CONTACT ME WITH A FIN DRAWING or  a SIM FILE  and we can  get a PERFECT fit!

I  RECOMMEND A  CLEAR COAT OVER THIS   once applied for a   NICE well protected finish.

Adding the clear UV LAMINATION makes  a bullet proof finish!  no need to clear coat. (this will add some thickness and weight to the decal   I WOULD NOT RECOMMEND THIS ON  THE SMALLER SETS)

due to the  print and cure times  turn around for this decal  will probably be 3 work days!

SMALL SET,  Price reflects my minimum setup and print fee    so you will receive 2  full sets for that price!