FAQ

Vinyl Decals

Installing Vinyl decals is pretty easy, But it make take a  little  to get used to how they apply. they are different then a lot of other types of decals. I HIGHLY recommend you watch the videos below , they have some GREAT tips tricks and methods.

CUT DECALS: Your decal will come with a backing (just like any peel and stick decal) and an application tape laid over it. The application tape (or backing tape) holds the decal together as one piece for easy installation. It also allows you to use a brandishing tool (such as a bondo spreader or even a credit card) to squeeze the decal down and work out bubbles without touching the decal. Once satisfied, the backing tape peels off to expose your new decal.

PRINTED WRAPS:   Please watch the videos  below for the BEST way to apply these.

 

Any questions PLEASE dont hesitate to contact me!

HOW TO INSTALL FULL COLOR PRINTED WRAPS

HOW TO INSTALL STANDARD CUT  VINYL  DECALS

(Please note:  they mention application spray..     this is for  decals   1/2″   or larger.   smaller decals   application spray will make them  harder to  apply.  the spray is to allow things to  move until fully  pressed on.  you can BUY  spray  I like “RAPID TAC”  which is available in small bottles  from most sign supply places. and ebay   OR you can use a windex type bottle full of warm water and a few drops of dish soap.  just enough to get some suds… this will work fine   in most all cases!

HOW TO APPLY A CUT VINYL  WRAP

 

How to wrap a nose cone

Category: Vinyl Decals